12.11.2010 16:20    

macapapazi
İyi Çalışmalar Grup Üyeleri,

Aşagıda kodlu olarak verdiğim lisp.Seçtiğiniz noktalar veya line/pline vb nesnelere degdiği her çizgi üzerinde "break" komutunun yapar.Arazi üzerinde çalışanlar için uygun bir lisp

Saygılar

Komut kısayolu: "fc" dir






Alıntı
;Fence.LSP: Cut out areas in your drawing using a fence.
;
;______________________________________________________________________________


Kod:

(defun CUTCR (cpt1 lpt1 lpt2 / cent ang1
                  dst1 dst2 dst3 dst4 dst5 cord ang2 wkpt cpt2 cpt3)
  (setvar "cmdecho" 1)
  (setq cent (cdr (assoc 10 obj)))     ;center
  (setq rad1 (cdr (assoc 40 obj)))                   ;find radius of circle
  (setq ang1 (- (angle lpt1 cent)(angle lpt1 lpt2))) ;find difference of angles
  (setq dst1 (distance lpt1 cent))                   ;find dist.lpt1 to cent
  (setq dst2 (* dst1 (sin ang1)))                    ;find side of triangle
  (setq cord (sqrt (abs (-(* rad1 rad1)(* dst2 dst2)))))    ;find half cord
  (setq ang2 (- (angle lpt1 lpt2) 1.57))             ;find perpend angle
  (setq wkpt (polar cent ang2 dst2))                 ;find workpoint
  (setq dst3 (distance cent wkpt))
  (Setq dst4 (distance lpt1 cent))
  (Setq dst5 (distance lpt2 cent))
  (if (< dst3 rad1)
    (progn
      (if (and (> dst4 rad1)(> dst5 rad1))
       (progn
       (entdel cpt1)
       (setq cpt2 (polar wkpt (angle lpt1 lpt2) cord))    ;find first intersect
       (setq cpt3 (polar wkpt (angle lpt2 lpt1) cord))    ;find second intersect
         (command "arc" "c" cent cpt2 cpt3                  ;draw first circle seg.
                  "arc" "c" cent cpt3 cpt2                  ;draw second circle seg.
          );command                                    ;close command funct.
       );progn if and
      );if and
      (if (and (> dst4 rad1)(< dst5 rad1))
       (progn
        (entdel cpt1)
        (setq cpt2 (polar wkpt (angle lpt1 lpt2) cord))    ;find first intersect
        (command "arc" "c" cent cpt2 "a" "359.9")
       );progn if and
      );if and
      (if (and (< dst4 rad1)(> dst5 rad1))
       (progn
        (entdel cpt1)
        (setq cpt2 (polar wkpt (angle lpt2 lpt1) cord))    ;find first intersect
        (command "arc" "c" cent cpt2 "a" "359.9")
       );progn if and
      );if and
    );progn if < dst3
  );if
)                                                    ;close defun

(defun CUTARC (cpt1 lpt1 lpt2 startpt endpt / cent rad)
  (setq cent (cdr (assoc 10 obj)))     ;center
  (setq rad (cdr (assoc 40 obj)))                   ;find radius of circle
  (setq startpt (polar cent startpt rad))
  (setq endpt (polar cent endpt rad))
  (setq ang1 (- (angle lpt1 cent)(angle lpt1 lpt2))) ;find difference of angles
  (setq dst1 (distance lpt1 cent))                   ;find dist.lpt1 to cent
  (setq dst2 (* dst1 (sin ang1)))                    ;find side of triangle
  (setq cord (sqrt (abs (-(* rad1 rad1)(* dst2 dst2)))))    ;find half cord
  (setq ang2 (- (angle lpt1 lpt2) 1.57))             ;find perpend angle
  (setq wkpt (polar cent ang2 dst2))                 ;find workpoint
  (setq dst3 (distance cent wkpt))
  (Setq dst4 (distance lpt1 cent))
  (Setq dst5 (distance lpt2 cent))
  (if (< dst3 rad1)
    (progn
      (if (and (> dst4 rad1)(> dst5 rad1))
       (progn
       (entdel cpt1)
       (setq cpt2 (polar wkpt (angle lpt1 lpt2) cord))    ;find first intersect
         (command "arc" startpt "e" cpt2 cent                  ;draw first circle seg.
                  "arc" cpt2 "e" endpt cent                 ;draw second circle seg.
          );command                                    ;close command funct.
       );progn if and
      );if and
    );progn if < dst3
  );if
)                                                    ;close defun


;Function to create list of polyline vertices----------------------------------

(defun getver (EntNme / SubEnt VerLst vertex vertex2)
(setq VerLst '())                                  ;setup vertex list
(if (= (cdr (assoc 0 (entget EntNme))) "POLYLINE")
   (progn
     (setq SubEnt (entnext EntNme))                     ;get first vertex
     (setq vertex (cdr (assoc 10 (entget SubEnt))))     ;get first vertex point
     (while (/= vertex nil)
       (setq VerLst (append VerLst (list vertex)))      ;add vertex to verlst
       (setq SubEnt (entnext SubEnt))                   ;go to next vertex
       (setq vertex (cdr (assoc 10 (entget SubEnt))))   ;get first vertex point
     )
   ) ;end progn
   (progn
     (foreach n (entget EntNme)
       (if (= 10 (car n)) (setq VerLst (append VerLst (list (cdr n)))))
     ) ;end foreach
   ) ;end progn
) ;end if
VerLst                                             ;return vertex list
)

(defun polymk (pEnt a b wid / verlst ptyp newpt newver int y-int newlst)
  (setq VerLst (getver pEnt))                       ;extract vertices
  (setq newlst '())
  (setq vert1 (car verlst))
  (setq ptyp (assoc 70 (entget pEnt)))
      (while (cadr VerLst)
          (setq NewVer (append NewVer (list (car VerLst) ) ) )
          (setq int    (inters a b (car VerLst)(cadr verLst) ) )
          (if int
            (setq
               NewVer (append NewVer (list int))
               newlst (append newlst (list newver))
               newver (LIST INT)
               y-int t
            );setq
          );IF INT
          (setq VerLst (cdr VerLst))
      );end while
  (setq NewVer (append NewVer (list (car VerLst))))
    (if (= (cdr ptyp) 1)
      (setq NewVer (append NewVer (list Vert1)))
    )
(setq newlst (append newlst (list newver)))
;if there is an intersection ***********************************************
(if Y-int
(progn
(entdel pent)
(foreach newver newlst
(progn
;    (entdel pent)
        (if(or (not col)(= col 0))
           (command "color" "bylayer")
           (command "color" col)
        )
        (if(= ltp nil)
           (command "linetype" "S" "bylayer" "")
           (command "linetype" "S" ltp "")
        )
  (command "layer" "S" la1 "")
  (command "erase" pEnt "")                         ;erase old pline
  (command "pline")                                 ;start pline command
  (foreach n NewVer (command n))                    ;insert points from NewVer
  (COMMAND)
  (if (> wid 0)
     (command "pedit" "l" "w" wid "")
  )
  (COMMAND "PLINE")
  (FOREACH N NEWVER2 (COMMAND N))
  (COMMAND)
  (if (> wid 0)
     (command "pedit" "l" "w" wid "")
  )
);progn foreach
);foreach
);prog if y-int
);if y-int
;end of "if there is an intersection **********************************
)

(Defun linemk ()
(entdel nam)
  (if(or (not col)(= col 0))
     (command "color" "bylayer")
     (command "color" col)
  );IF COL
  (if(= ltp nil)
     (command "linetype" "S" "bylayer" "")
     (command "linetype" "S" ltp "")
  );IF LTP
(command "layer" "S" la1 ""
         "line" pt1 int pt2 "" )
(setq col nil ltp nil)
)

(defun mem (d l / h y last)
(setq h (list d l))
(while (and l (/= l "Close"))
   (setq y l)
   (initget "Close")
   (setq l (getpoint l "\nNext point/Close: "))
   (if (and l (/= l "Close"))
      (progn
      (setq last l)
      (grdraw l y 7 1)
      (setq h (append h (list l)))
      )
   )
   );while
(if (= l "Close")
  (progn
  (setq h (append h (list first) ))
  (grdraw last first 7 1)
  )
)

h
)

(defun c:fc ( / x y u b v1 v2 pt1 pt2 obj ccol first
                 cltp int nam typ la1 col ltp cla CUTENT NXTNME old_osmode)
(command ".undo" "begin")
(setq cla (getvar "clayer"))
(setq ccol (getvar "cecolor"))
(setq cltp (getvar "celtype"))
(setvar "cmdecho" 0)
(command "ucs" "W")
(initget 1 "Select")
(setq x (getpoint "\n<Pick first point of fence>/Select: "))
(if (= x "Select")
  (progn
     (setq cutent (CAR (entsel "\nPick line or pline defining cut location: ")))
       (setq ctyp (cdr (assoc 0 (entget cutent))))
       (if (or (= ctyp "POLYLINE") (= ctyp "LWPOLYLINE"))
         (PROGN
           (setq u (Getver cutent))
           (IF (= (CDR (ASSOC 70 (ENTGET CUTENT))) 1)
               (SETQ U (APPEND U (LIST (CAR U))))
           );if assoc 70
         );progn
       );if pline
       (IF (= CTYP "LINE")
           (SETQ U
             (LIST
              (setq pt1(cdr(assoc 10 (ENTGET CUTENT))))
              (setq pt2(cdr(assoc 11 (ENTGET CUTENT))))
             );list
           );setq u
      );if line
  );progn
  (PROGN
    (setq y (getpoint x "\nNext point: "))
    (setq first x)
    (grdraw x y -1 1)
    (setq u (mem x y))
  );progn
);if select
(setq old_osmode (getvar "OSMODE"))
(setvar "osmode" 0)
(setq a (car u))
(setq u (cdr u))
(while (/= u nil)
  (setq b (car u))
  (setq v1(ssget "c" a b))
  (setq v2 0)
    (if (/= v1 nil)
    (while (< v2 (sslength v1))
      (setq obj (entget (SETQ NXTNME (ssname v1 v2))))
      (setq nam(cdr(assoc -1 obj)))
      (setq typ(cdr(assoc 0 obj)))
      (setq la1(cdr(assoc 8 obj)))
      (if (AND (or (= typ "POLYLINE") (= typ "LWPOLYLINE"))(/= NXTNME CUTENT))
          (PROGN
          (setq col(cdr(assoc 62 obj)))     ;color
          (setq ltp(cdr(assoc 6 obj)))      ;linetype
          (setq pwid (cdr (assoc 41 obj)))  ;pline width
          (polymk nam a b pwid)
          );PROGN
      )
      (if (AND (= typ "LINE")(/= NXTNME CUTENT))
          (progn
          (setq col(cdr(assoc 62 obj)))     ;color
          (setq ltp(cdr(assoc 6 obj)))      ;linetype
          (setq pt1(cdr(assoc 10 obj)))     ;beginning point
          (setq pt2(cdr(assoc 11 obj)))     ;end point
          (setq int(inters a b pt1 pt2 ))
          (if int (linemk))
          );progn
      );if LINE
      (if (= typ "CIRCLE")
          (progn
          (setq col(cdr(assoc 62 obj)))     ;color
          (setq ltp(cdr(assoc 6 obj)))      ;linetype
          (cutcr nam a b)
          )
      )
      (if (= typ "ARC")
          (progn
          (setq col (cdr(assoc 62 obj)))     ;color
          (setq ltp (cdr(assoc 6 obj)))      ;linetype
          (setq startpt (cdr (assoc 50 obj)))
          (setq endpt (cdr (assoc 51 obj)))
          (cutarc nam a b startpt endpt)
          )
      )

     (setq v2(+ v2 1))
    );while < v2
   );if
  (setq a (car u))
  (setq u (cdr u))
  );while
  (setvar "OSMODE" old_osmode)
  (command "color" ccol
           "linetype" "S" cltp ""
           "layer" "S" cla ""
           "ucs" "P"
           "redraw"
           ".undo" "end"
  ) ;end command
  (redraw)
  (princ)
)

ehya (12.11.2010 17:13 GMT)

13.11.2010 06:20    

bud_0782
teşekkürler

06.12.2011 08:59    

KeoZ
Teşekkürler
yalnız bu lisp arazi üzerinde münhanilerin kotlarını yani elevatıon değerini "0" yapıyor...
arazi üzerindeki münhani kotlarının bozulmaması gerekiyor...
eğer bu komu çözülürse işte o zaman arazi üzerinde çalışmak için süper olur :d

18.09.2015 07:27    

mateus


Linkleri görebilmek için ÜYE olmalısınız.

> 1 <
Copyright © 2004-2022 SQL: 0.752 saniye - Sorgu: 53 - Ortalama: 0.01419 saniye